Industrial LED luminaires

PENDANT LED CHANDELIERS " LED SPOTLIGHTS " LED STREET LIGHTS

Industrial LED luminaires effectively replace metal halide and sodium vapour luminaires. Ideal for illuminating large areas, parking lots, logistics centres, manufacturing and shopping malls. It is the perfect choice for those who want good indoor illumination and low electricity consumption. Our industrial LED luminaires are designed to illuminate high floors (from 4 m to 15 m). The luminaires are subject to strict quality and reliability requirements and come with a 7-year warranty.

CE Declaration (EN/LT/LV/EE)

LVD Directive 2014/35/EU

EMC Directive 2014/30/EU

RoHS Directive (EU) 2015/863

USE

Lighting of production premises, lighting of work premises, lighting of warehouses, lighting of shops and shopping centres, lighting of workshops, lighting of loading ramps, lighting of petrol stations, lighting of other premises.

3D MODEL

LED PENDANT LUMINAIRE PS-100-CREE

PS-100-CREE MODELS

LED CREE XLamp XT-E White 1-5W S5 170 lm/W Ra70

min 60W ↔ max 135W

min 9600 lm ↔ max 22950 lm


	Dimensions	Ø410mm x H45mm x W3.8kg
	LED model	CREE XLamp XT-E White 1-5W S4-S5 Ra70
	Colour, CCT	4000K÷4200K - 5000K÷5200K - 6000K÷6200K
	Angle of incidence	60º - 90º
	Luminous flux	min. 9600 lm ÷ max. 22950 lm
	Consumption power	min. 60W ÷ max. 135W
	Energy source	XLG-150-H-A/HLG-120H-36A
	Warranty	Year 5/7 LM80-LM90
	Safety	IP54 CE I

PENDANT LED LUMINAIRE PS-100-CREE

LIGHT SOURCE	LED CREE XLamp XT-E White, 1-5W, 1500mA, S4-S5, life span > 100000h, 160-170 lm/W CCT 4000/5000/6000K BEAM ANGLE 60° 90°
ENERGY SOURCE	MEAN WELL LED DRIVER HLG-120H-36A MEAN WELL LED DRIVER XLG-150-H-A (AB, DA2) - 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) - DALI-2 control technology MEAN WELL LED DRIVER ELG-150-42/48D2 - Constant Light Output function programmable - Smart timer dimming function programmable
NAMED POWER	60W ~ 120W (ADJUSTABLE VIA BUILT-IN POTENTIOMETER)
LUMINOUS FLUX	9600 lm ~ 19200 lm
MATMENYS	HEIGHT - 410 mm, HEIGHT - 45 mm, WEIGHT - 3,80 kg.
FIXING ELEMENTS	STAINLESS STEEL METAL CHAIN + CARABINE
CONDITIONS OF USE	TEMPERATURE -40°C ~ +45°C, HUMIDITY 20%-80%
SAUGA	IP54 I
CERTIFICATES	CE, LVD, EMC, RoHS
WARRANTY	5/7 Year LM80-LM90

TECHNICAL DOCUMENTATION

PS-100-CREE MODELS

Technical Specification (LT, EN, LV, EE) Instructions for use Optometric data (beam 90° 100W) Optometric data (beam 60° 75W) EULUMDAT(beam 90° CCT 5000K) EULUMDAT(beam 60° CCT 5000K) Temperature data

PS-100-CREE MODELS

INSTALLATION INSTRUCTIONS

Warnings, precautions and instructions for use

INSTALLATION WORK MAY ONLY BE CARRIED OUT BY A SUITABLY QUALIFIED PERSON WITH A HAZARDOUS WORK PERMIT

DO NOT COVER THE BACK OF THE LUMINAIRE. DO NOT PLACE THE POWER SUPPLY ON THE BACK OF THE LUMINAIRE

The luminaire is Class I and must be earthed (see Figure 1).
The mechanical suspension system of the luminaire shall be able to support 5 times the weight
The power cord will not be replaced if it is damaged and the appliance is faulty
The power supply of the luminaire shall not be covered by any material
Make sure the luminaire and power supply are in good working order before installation
The luminaire must not be squeezed, thrown or broken
Do not install near heat sources
It is mandatory to switch off the automatic voltage switches before installing the luminaire