T8 LED lamp, G13
Production "T8 LED lamps, G13
T8 fluorescent lamps are now being replaced by LED counterparts everywhere due to their energy efficiency, safety and long life. This does not require replacing the luminaire as a whole. All that is needed is a slight upgrade of the electrical circuit of the existing luminaire and the addition of T8 LED lamps, which are specifically designed for G13 sockets. To make this process as simple as possible, the T8 LED lamps are identical to their fluorescent equivalents and have identical dimensions (diameter 26 mm, length 600 mm/1200 mm/1500 mm)
USE
Industrial lighting, workplace lighting, warehouse lighting, car park lighting, corridor lighting, shop lighting, car wash lighting, garage lighting, common area lighting, other lighting.
BW MODELS
LED SMD2835 140 lm/W Ra80
Dimensions Length 600 mm G13 ∅ 26mm
Colour, CCT 4000K 5000K 6000K
LED model Epistar SMD2835 Ra80
Materials aluminium plastic
Power supply 85V~265VAC 50/60Hz
Galia 9W
Warranty 24 months
Protection IP20 CE
Dimensions Length 1200 mm G13 ∅ 26mm
Colour, CCT 4000K 5000K 6000K
LED model Epistar SMD2835 Ra80
Materials aluminium plastic
Power supply 85V~265VAC 50/60Hz
Galia 18W
Warranty 24 months
Protection IP20 CE
Dimensions length 1500 mm G13 ∅26mm
Colour, CCT 4000K 5000K 6000K
LED model Epistar SMD2835 Ra80
Materials aluminium plastic
Power supply 85V~265VAC 50/60Hz
Galia 25W
Warranty 24 months
Protection IP20 CE
CN MODELS
LED SMD2835 110 lm/W Ra70
Dimensions Length 600 mm G13 ∅ 26mm
Colour, CCT 4000K 5000K 6000K
LED model Epistar SMD2835 Ra70
Materials aluminium plastic
Power supply 85V~265VAC 50/60Hz
Galia 9W
Warranty 24 months
Protection IP20 CE
Dimensions Length 1200 mm G13 ∅ 26mm
Colour, CCT 4000K 5000K 6000K
LED model Epistar SMD2835 Ra70
Materials aluminium plastic
Power supply 85V~265VAC 50/60Hz
Galia 18W
Warranty 24 months
Protection IP20 CE
Dimensions length 1500 mm G13 ∅26mm
Colour, CCT 4000K 5000K 6000K
LED model Epistar SMD2835 Ra70
Materials aluminium plastic
Power supply 85V~265VAC 50/60Hz
Galia 25W
Warranty 24 months
Protection IP20 CE
BW MODELS
LED SMD2835 140 lm/W Ra80
CN MODELS
LED SMD2835 110 lm/W Ra70
INSTALLATION INSTRUCTIONS
General wiring diagram for a T8 LED lamp
Installation instructions for the luminaire
- Switch off the power
- Remove the fluorescent lamp
- Remove the ballast/wiring cover
- Remove ballast
- Connect without ballast according to the diagram below
- Replace the cord cover
- Insert LED lamp
- Switch on the power
Warnings, precautions and instructions for use
- Fluorescent lamps cannot be directly replaced by LED lamps.
- During installation work, the luminaire's wiring, ballast or other electrical parts may be damaged. Check for damaged wires or components.
- The installation of the luminaire requires specific knowledge of the luminaire's electrical systems. A qualified electrician must be consulted.
- To avoid damaging or scratching the wires, do not touch them with sharp objects.
- DANGER - RISK OF ELECTRIC SHOCK - DISCONNECT THE POWER BEFORE STARTING WORK!
- Only use luminaires that have appropriate design features and dimensions.
INSTALLATION WORK MAY ONLY BE CARRIED OUT BY A SUITABLY QUALIFIED PERSON WITH A HAZARDOUS WORK PERMIT
DO NOT USE WITH DIMMERS. THIS DEVICE IS NOT INTENDED FOR USE IN EMERGENCY EXIT INSTALLATIONS
Technical DOCUMENTATION
ADDITIONAL INFORMATION
